ESP32-P4-Pi-VIEWE: Raspberry Pi-Inspired ESP32-P4 + ESP32-C6 Board with Ethernet, USB, and 40-Pin GPIO Header

ESP32-P4-Pi-VIEWE: Raspberry Pi-Inspired ESP32-P4 + ESP32-C6 Board with Ethernet, USB, and 40-Pin GPIO Header

2 Min Read

The ESP32-P4-Pi-VIEWE is a development board inspired by Raspberry Pi, featuring a VIEWE ESP32-P4C6-Core module. It combines a 400 MHz ESP32-P4 dual-core RISC-V MCU with an ESP32-C6 chip for Wi-Fi 6 and Bluetooth 5.0, along with 32MB PSRAM and 16MB NOR flash. The board supports 10/100Mbps Ethernet, has MIPI DSI and CSI connectors for display or camera, two onboard microphones, a speaker output, a USB 2.0 port, a micro SD card slot, and a 40-pin GPIO header, all in an 85 x 56 mm credit card-sized form.

ESP32-P4-Pi-VIEWE specifications:
– Main module: VIEWE ESP32-P4C6-Core
– Microcontroller: ESP32-P4NRW32
– Dual-core RISC-V MCU @ 360/400 MHz with AI instructions and single-precision FPU
– Single-RISC-V LP MCU core @ up to 40 MHz
– GPU: 2D Pixel Processing Accelerator
– VPU: H.264 and JPEG codecs support
– Memory: 768 KB HP L2MEM, 32 KB LP SRAM, 8 KB TCM, 32MB PSRAM
– Storage: 128 KB HP ROM, 16 KB LP ROM
– Wireless: 2.4 GHz WiFi 6, Bluetooth 5, and 802.15.4 via ESP32-C6FH4 SoC
– Additional storage: 16MB NOR flash
– Other features:
– Storage: MicroSD card slot
– Display I/F: 2-lane MIPI DSI connector
– Camera I/F: 2-lane MIPI CSI connector compatible with multiple sensors
– Audio: ES8311 audio codec, 2-pin header for 8Ω/2W speaker, 2x microphones + ES7210 AEC chip
– Networking: 100Mbps Ethernet RJ45 port, WiFi 6, Bluetooth 5 with ceramic antenna and IPEX antenna connector
– USB: 1x USB 2.0 OTG Type-A, 2x USB Type-C ports for power, programming, and debugging
– Expansion: 40-pin GPIO header
– Debugging: USB-C port, 4-pin UART connector, 3-axis accelerometer and gyroscope
– Misc: Boot and Reset buttons, RGB LED
– Power Supply: 5V via USB-C or optional PoE
– Dimensions: 85 x 56 mm

The ESP32-P4-Pi-VIEWE, known as the ESP32-P4-VIEWE-MD board, maintains similar features to the Waveshare ESP32-P4-Module-DEV-KIT but has two microphones and adds an accelerometer and a gyroscope. It’s available for purchase on AliExpress for $33.13 or on the VIEWE store for $17.99 plus shipping. The board offers support for the ESP-IDF framework, sample code, and schematics available on GitHub.

VIEWE’s board has the same dimensions, hole position, and header pinout as the Raspberry Pi 5. It is more affordable, but Waveshare offers kits with additional accessories like a camera and display.

You might also like